Metal Roof
Step 1. Roll out the mesh and screw into each end of the gutter
Step 2. Screw the trim onto the gutters edge holding the mesh in place
Step 3. Place saddles on every second corrugation and screw into the roof
Tile Roof
Step 1. Roll out the mesh and screw into each end of the gutter
Step 2. Screw the trim onto the gutters edge holding the mesh in place
Step 3. Make 2-3 cuts per tile to the end of the second tile
Step 4. Pick up each tile and tuck the mesh underneath the second row (the tiles must be tucked in 1 direction which is right if you are standing on the roof)